The Tesla Wall Connector Gen 3 is a tethered home EV charger that costs about A$800 for the hardware in Australia as at November 2026, with a 4 year warranty and a 7.3 m cable. Installed, a typical job runs about A$1,550 to A$2,300. It charges any car with a Type 2 plug, and since October 2026 it can follow surplus solar, but only if you also own a Tesla Powerwall.
This is independent desk research from retailer pages, SolarQuotes and Tesla software notes. We did not test the charger, and Tesla did not pay for or see this review. Tesla’s own Australian store blocks automated reading, so prices come from named Australian sources and you should confirm the current price with Tesla or your installer.
Source: SolarQuotes Tesla charger review; JET Charge Australia product page, read November 2026.
Key facts
- As at November 2026, the Tesla Wall Connector Gen 3 lists at A$727 excluding GST (about A$800 including GST) at JET Charge, and SolarQuotes reported the Tesla store price as A$800 plus A$10 delivery in December 2024.
- JET Charge lists the Tesla Wall Connector Gen 3 with a maximum current of 32 A, adjustable by the installer, on single phase 230 V or three phase 400 V, which is about 7.4 kW on single phase and up to about 22 kW on three phase (Solar Cobber calculation).
- SolarQuotes says Tesla estimates installation of the Tesla Wall Connector at A$750 to A$1,500, which puts a typical installed total at about A$1,550 to A$2,300.
- The Tesla Wall Connector Gen 3 has a 4 year warranty, the longest of the home chargers in our best home EV chargers guide alongside the Evnex E2.
- Tesla’s Smart Charging update 26.34, reported by SolarQuotes on 16 October 2026, lets a Gen 3 Wall Connector charge any EV from surplus solar, but it requires a Powerwall 2 or Powerwall 3.
- SolarQuotes reports that the Tesla Wall Connector has no OCPP support, and that Tesla’s smart features work for one Wall Connector per site.
Tesla Wall Connector specs at a glance
The Tesla Wall Connector Gen 3 is a single model that works on either single phase or three phase supply, set during installation. The table below uses the JET Charge Australia product page, read November 2026, and the SolarQuotes review where noted.
| Specification | Tesla Wall Connector Gen 3 |
|---|---|
| Supply | 1 phase 230 V; 3 phase 400 V (JET Charge) |
| Maximum current | 32 A, adjustable by the installer |
| Maximum power | About 7.4 kW single phase; up to about 22 kW three phase (Solar Cobber calculation: 32 A at 230 V, and 32 A at 400 V times the square root of 3) |
| Cable | 7.3 m, tethered |
| Connectivity | Wi-Fi 2.4 GHz, 802.11b/g/n; no OCPP (SolarQuotes) |
| Earth leakage protection | Integrated, Type A plus DC 6 mA |
| Enclosure rating | IP44 on JET Charge’s table; SolarQuotes says IP55 |
| Operating temperature | -30 to 50 degrees C; output can reduce in heat (SolarQuotes says from about 35 degrees C) |
| Size and weight | 345 x 155 x 110 mm, 6.8 kg |
| Warranty | 4 years |
The enclosure rating differs between our two sources, so ask your installer for the figure on the unit you are given, especially for a wall that gets rain. SolarQuotes also notes that the Wall Connector is rated for outdoor use but recommends a shaded spot, since output can drop in heat.
How much does a Tesla Wall Connector cost in Australia?
A Tesla Wall Connector Gen 3 costs about A$800 including GST in Australia, or A$727 excluding GST at JET Charge. SolarQuotes also reports coloured covers at A$140 plus A$10 delivery, as at December 2024.
| Source (date) | Price | Notes |
|---|---|---|
| SolarQuotes review (December 2024) | A$800 plus A$10 delivery | Tesla Australia store price; SolarQuotes suggests buying through an installer so the installer handles any warranty claim |
| JET Charge wholesale (read November 2026) | A$727.00 excluding GST (about A$799.70 including GST, Solar Cobber calculation) | Listed as unavailable at the time we read it |
Prices move with retailer promotions, so treat A$800 as a guide, not a quote. For the rest of the cost, see our EV charger installation cost guide.
What does Tesla Wall Connector installation cost?
Tesla Wall Connector installation typically adds A$750 to A$1,500 to the hardware price, for a total of about A$1,550 to A$2,300. That installation range is Tesla’s own estimate as reported by SolarQuotes, and our arithmetic adds the A$800 hardware price.
Extras from our installation cost guide change the total. A switchboard upgrade is reported at A$500 to A$1,500 or more, and trenching at A$50 to A$100 per metre. The chart below combines these ranges for a 10 m trench.
- Low
- High
Source: Solar Cobber calculation from SolarQuotes (Tesla installation estimate), Solar X Energy (trenching, switchboard) as cited in our installation cost guide. Simple job: A$800 plus A$750 to A$1,500. Trench: add 10 m at A$50 to A$100 per metre (A$500 to A$1,000). Board upgrade: add A$500 to A$1,500.
View the data as a table
| Low | High | |
|---|---|---|
| Simple job | A$1,550 | A$2,300 |
| 10 m trench | A$2,050 | A$3,300 |
| Board upgrade | A$2,050 | A$3,800 |
A long cable run or a full switchboard can push the installed price of the same A$800 charger close to A$4,000. Three phase installs cost more where the home still needs a three phase supply upgrade.
How fast does the Tesla Wall Connector charge?
The Tesla Wall Connector charges at up to about 7.4 kW on single phase and up to about 22 kW on three phase, but the car sets the real speed. SolarQuotes says most EVs accept 11 kW or less on AC, and reports roughly 40 km of range per hour at 7.4 kW and 60 km at 11 kW.
The chart shows how long an ideal charge of 50 kWh takes at each power level, ignoring charging losses and the car’s own limit.
Source: Solar Cobber calculation from the 32 A maximum on the JET Charge product page. 3.7 kW is 16 A single phase, 7.4 kW is 32 A single phase, 11 kW is 16 A three phase, 22 kW is 32 A three phase.
View the data as a table
| Hours | |
|---|---|
| 3.7 kW | 13.5 h |
| 7.4 kW | 6.8 h |
| 11 kW | 4.5 h |
| 22 kW | 2.3 h |
An overnight charge adds a typical day’s driving in a couple of hours at 7.4 kW, which is why the faster figures matter mainly if your car accepts them and your home has three phase power.
Does the Tesla Wall Connector work for solar charging?
Yes, but only with a Tesla Powerwall. From Tesla software update 26.34, reported in October 2026, a Gen 3 Wall Connector paired with a Powerwall 2 or Powerwall 3 can use a “Charge on Solar” setting that charges mainly from surplus solar.
SolarQuotes reported on 16 October 2026 that Tesla’s Australian support page describes the feature as available for any EV regardless of make. Our other sources (Drive Tesla Canada, 12 October 2026, and Not a Tesla App, 11 October 2026) do not name a region, so confirm Australian availability with your installer.
- Requirements: Powerwall 2 or 3 and a Gen 3 Wall Connector, both on firmware 26.34 or later, on the same Wi-Fi network, with the Powerwall in Self-Powered mode.
- Limits: Smart charging works for one Wall Connector per site, and Charge on Solar and Low-Cost Charging cannot run at the same time.
- Behaviour: The car charges mainly from surplus solar and tops up from the grid or the Powerwall to meet your target. SolarQuotes reports that charging will not start until surplus exceeds a minimum Tesla does not publish.
Without a Powerwall the charger has no solar mode of its own. SolarQuotes lists workarounds: schedule charging through the car, use the paid ChargeHQ app, or charge at midday with a large system. See our guide to charging an EV with solar and our Tesla Powerwall 3 review.
Can you use a Tesla Wall Connector with other EVs?
Yes. The Wall Connector Gen 3 charges non-Tesla cars that accept AC charging through the standard Type 2 connector used in Australia, and Tesla’s solar feature is described for any EV make. The Wall Connector has no OCPP support per SolarQuotes, so it cannot be controlled by outside software that depends on that protocol.
Check three things before buying it for a non-Tesla car. First, the car’s onboard charger sets the speed, so a 7 kW car gains nothing from three phase. Second, the Tesla app features need the Powerwall. Third, the tethered cable is fixed, so confirm that the 7.3 m reach suits where the car parks. The Wall Connector is not a vehicle-to-grid charger; see our V2G guide.
What do owners praise and complain about?
SolarQuotes’ review page showed a customer rating of 4.9 from 256 ratings when we read it in November 2026, with 234 five star ratings. That is one retailer-adjacent platform and the ratings come from people who chose to rate, so treat it as a signal, not proof.
Praised: price, build quality and after-sales support. SolarQuotes also placed the Wall Connector in its EV Charger Installers’ Choice awards, including first in “Every Dollar Counts” and first (tied with myenergi) for after-sales support in 2024.
Complained about:
- No smart or solar features without a Powerwall (SolarQuotes).
- No OCPP support (SolarQuotes).
- Wi-Fi: SolarQuotes reports it needs a 2.4 GHz network, and Tesla Motors Club forum threads include owners whose chargers dropped offline or could not reach Tesla’s update server. These threads are anecdotal and mostly not Australian, and we could not size how common the problem is.
- Heat: output can reduce in hot weather, so a shaded wall matters.
Tesla Wall Connector vs alternatives
The Tesla Wall Connector is the cheapest per year of warranty among the chargers we compared, though it only has solar smarts with a Powerwall. The chart divides the hardware price by the warranty years.
Source: Solar Cobber calculation from prices and warranties in our best home EV chargers guide (SolarQuotes, EVSE, Evnex, myenergi), November 2026. Tesla 800/4, Evnex 1,099/4, Sungrow 950/3, Ocular 1,195/3, Sigenergy 1,200/3, GoodWe 850/2, Zappi 1,545/3, Wattpilot 1,750/2. The Wattpilot price was set in December 2024.
View the data as a table
| A$ per warranty year | |
|---|---|
| Tesla Wall Connector Gen 3 | A$200 |
| Evnex E2 Core | A$275 |
| Sungrow AC22E-01 | A$317 |
| Ocular IQ Home Solar | A$398 |
| Sigenergy EV AC Charger 7 kW | A$400 |
| GoodWe HCA | A$425 |
| myenergi Zappi | A$515 |
| Fronius Wattpilot 22 J | A$875 |
| Charger | Hardware price (November 2026) | Solar surplus mode | Warranty |
|---|---|---|---|
| Tesla Wall Connector Gen 3 | About A$800 | Only with a Tesla Powerwall | 4 years |
| myenergi Zappi | From A$1,545 | Built in, any inverter | 3 years |
| Evnex E2 Core | A$1,099 | Built in | 4 years |
| Sungrow AC22E-01 | About A$950 | Needs Sungrow hybrid inverter | 3 years |
Prices and warranties for the rivals come from our best home EV chargers guide. See our Zappi charger review if you have solar without a Powerwall.
Who should buy the Tesla Wall Connector?
It suits three kinds of buyer. If you own a Powerwall, it is the only charger that uses Tesla’s new solar and rate-based smart charging. If you charge overnight on a cheap tariff, it is a low-cost, well-supported charger; see peak and off-peak times. If you drive a Tesla and want the simplest setup, it fits that too.
Skip it if you have solar without a Powerwall and want to charge from surplus. As our worked example in the chargers guide shows, charging 36 kWh a week from surplus solar instead of the grid at 32c per kWh saves about A$9.72 a week, because the export rate of 5c per kWh is forgone. For that, a solar-aware charger such as the Zappi may repay its higher price more slowly than you expect. Compare feed-in rates in our feed-in tariff guide. Also check that government support is not available in your state at our EV rebates guide, and see the cost to charge an electric car.
To get a quote from a licensed electrician, start at our installer directory.
FAQ
How much does a Tesla Wall Connector cost in Australia?
About A$800 including GST for the hardware as at November 2026. JET Charge lists it at A$727 excluding GST, and SolarQuotes reported A$800 plus A$10 delivery at Tesla’s store in December 2024. Installation is extra.
How much does Tesla Wall Connector installation cost?
Typically A$750 to A$1,500, per Tesla’s estimate as reported by SolarQuotes, for a total of about A$1,550 to A$2,300. A switchboard upgrade, a long cable run or three phase supply work can add more.
Is the Tesla Wall Connector single phase or three phase?
It is both. The same Gen 3 unit works on 230 V single phase or 400 V three phase, with a maximum of 32 A adjustable by the installer, so the model does not change. Three phase wiring costs more to install.
Can the Tesla Wall Connector charge from solar?
Only with a Tesla Powerwall 2 or 3. Tesla software 26.34 added a Charge on Solar setting in October 2026, which needs the Powerwall in Self-Powered mode. Without a Powerwall the charger has no solar mode of its own.
Does the Tesla Wall Connector work with other EVs?
Yes, it charges cars that use the standard Type 2 connector and accept AC charging, not just Teslas. SolarQuotes reported on 16 October 2026 that Tesla’s Australian support page says Charge on Solar works for any EV make. The car sets the actual charging speed.
Does the Tesla Wall Connector need Wi-Fi?
Its smart features and updates use Wi-Fi, and SolarQuotes says it needs a 2.4 GHz network. Tesla’s solar feature also needs the Wall Connector and Powerwall on the same network.
Is the Tesla Wall Connector waterproof?
It is designed for indoor or outdoor use, but the enclosure rating differs by source: IP44 on the JET Charge page and IP55 per SolarQuotes. Ask your installer for the rating on your unit and choose a shaded spot.
What warranty does the Tesla Wall Connector have?
4 years at JET Charge and in SolarQuotes’ review. That compares with 2 to 3 years for most rivals in our chargers guide.
Sources
- JET Charge Australia, Tesla Gen 3 Wall Connector (specifications and price, read November 2026)
- SolarQuotes, Tesla Wall Connector review (price, installation estimate, ratings, warranty)
- SolarQuotes, Tesla’s latest updates let power flow both ways (16 October 2026)
- Not a Tesla App, smart charging for Powerwall and Wall Connector (11 October 2026)
- Drive Tesla Canada, Wall Connector and Powerwall smart charging (12 October 2026)
- Tesla Installer Academy, Wall Connector commissioning (YouTube)
About this review
This review is by the Solar Cobber editorial team and is independent desk research checked in November 2026. We did not test the product. Solar Cobber is a free directory that may earn referral or advertising fees from installers, and commercial relationships never affect our content. This is general information, not financial advice. To report a correction, contact us.
Filed under Solar Products
Back to blog
