The best home EV charger in Australia for most solar households in November 2026 is the myenergi Zappi (hardware from A$1,545, works with any inverter brand). The Tesla Wall Connector (about A$800) is the cheapest sound option if you charge overnight, and several other chargers only use surplus solar when paired with their own brand of inverter or battery.
This roundup compares eight home chargers sold in Australia. It is independent desk research from manufacturer pages and published Australian prices. We did not test any charger, and no manufacturer paid for a place. Prices are hardware only, so budget for installation separately in our EV charger installation cost guide.
Key facts
- As at November 2026, the Tesla Wall Connector Gen 3 lists at about A$800 including GST (A$727 excluding GST at JET Charge) with a 4-year warranty, but has no solar surplus mode of its own.
- myenergi states on its Australian website that the Zappi starts from A$1,545 and carries a 3-year warranty; SolarQuotes lists it at about A$1,595 as at November 2026.
- A single phase home supply limits AC charging to about 7.4 kW, so a 22 kW charger only delivers more than 7.4 kW on three phase and only if the car can accept it.
- The Fronius Wattpilot, Sigenergy EV AC Charger, Sungrow AC22E-01 and GoodWe HCA only deliver solar surplus charging alongside the same brand’s inverter or battery, according to SolarQuotes in November 2026.
- Warranties range from 2 years (Fronius Wattpilot, GoodWe HCA) to 4 years (Tesla Wall Connector, Evnex E2), according to SolarQuotes and the manufacturers’ Australian pages.
- A Zappi, Wattpilot or Ocular unit starts charging only when the surplus reaches about 1.4 kW to 1.6 kW on single phase, which is the 6 A minimum current the charging standard allows.
Quick picks
Each charger below wins one use case. The pick that suits you depends mostly on whether you have solar and which inverter you own.
| Use case | Pick | Hardware price (November 2026) |
|---|---|---|
| Best for any solar inverter | myenergi Zappi | From A$1,545 (myenergi) |
| Best cheap charger for overnight charging | Tesla Wall Connector Gen 3 | About A$800 (SolarQuotes, JET Charge) |
| Best value solar-ready charger with a long warranty | Evnex E2 Core | A$1,099 (Evnex) |
| Best for an extendable warranty on a solar charger | Ocular IQ Home Solar | From A$1,195 (EVSE) |
| Best for Fronius inverter owners | Fronius Wattpilot | About A$1,750 to A$1,800 (SolarQuotes, Solar Choice; not re-priced for 2026) |
| Best for Sigenergy battery owners | Sigenergy EV AC Charger | About A$1,200 to A$1,500 (SolarQuotes) |
| Best for Sungrow hybrid inverter owners | Sungrow AC22E-01 | About A$950 (SolarQuotes) |
| Best for GoodWe battery owners | GoodWe HCA | About A$850 to A$1,200 (SolarQuotes) |
Comparison table
The table compares the eight chargers on the specifications that matter at purchase. Figures are from the manufacturer’s Australian page where one was readable, otherwise from SolarQuotes or a named Australian retailer, checked November 2026. Prices include GST unless stated.
| Charger | Power (kW) | Solar surplus mode | Tethered or socket | App and load management | Warranty | Hardware price (source, month) |
|---|---|---|---|---|---|---|
| Tesla Wall Connector Gen 3 | 7.4 single phase; hardware up to 32 A on three phase (car usually limits it to 11) | None alone; needs a Tesla Powerwall | Tethered, 7.3 m | Tesla app | 4 years | About A$800 (SolarQuotes, November 2026) |
| myenergi Zappi v2.1 | 7.4 single phase; 22 three phase | Eco and Eco+, any inverter, CT clamp | Tethered 6.5 m or socket (about A$50 less) | myenergi app; OCPP 1.6J | 3 years | From A$1,545 (myenergi, November 2026) |
| Evnex E2 Core | 7.4 | Built in | Tethered, 5 m | Evnex app; overload protection | 4 years | A$1,099 (Evnex, November 2026) |
| Ocular IQ Home Solar | 7 single phase; 22 three phase | Fast, Solar Assist, Solar Only | Tethered or socket | App; CT clamp load control | 3 years (Ocular and EVSE pages, November 2026) | A$1,195 (EVSE, November 2026) |
| Fronius Wattpilot | 11 J: 3.68 single, 11 three; 22 J: 7.3 single, 22 three | Needs Fronius inverter and smart meter | Tethered; cable extra | Fronius SolarWeb app; OCPP 1.6 | 2 years | About A$1,750 to A$1,800 for 22 J (SolarQuotes, priced December 2024; Solar Choice RRP; not re-confirmed 2026) |
| Sigenergy EV AC Charger | 7 single; 11 or 22 three | 100% PV, solar boost, fast; SigenStor needed | Tethered or untethered | mySigen app; load management needs Sigen Power Sensor | 3 years | A$1,200, A$1,300, A$1,500 for 7, 11, 22 kW (SolarQuotes, November 2026) |
| Sungrow AC22E-01 | 7.4 single; 11 or 22 three | Needs Sungrow hybrid inverter and iHomeManager | Tethered, 5 m | iSolarCloud app; OCPP 1.6 | 3 years (cable 2 years) | About A$950 (SolarQuotes, November 2026) |
| GoodWe HCA | 7 single; 11 or 22 three | Solar-only smart charging only with a GoodWe battery (per SolarQuotes) | Tethered 6 m (22 kW socket only) | App; load balancing on G2 | 2 years | About A$850 to A$1,100 (SolarQuotes review, undated); A$1,200 to A$1,500 in its table |
Best for any solar inverter: myenergi Zappi
The myenergi Zappi is the safest solar-aware pick because it measures your surplus with its own CT clamp rather than talking to your inverter. As at November 2026, myenergi’s Australian site lists it from A$1,545 and describes Eco, Eco+ and Fast modes.
Pros:
- Works with any inverter brand.
- Eco+ charges only from surplus solar; Eco blends in grid power when surplus drops below about 1.4 kW.
- One multiphase unit covers single phase (up to 7.4 kW) and three phase (up to 22 kW).
Cons:
- The 3-year warranty is short at this price.
- SolarQuotes notes a 40 degree maximum operating temperature, a real limit for a charger on a hot western wall.
Who should skip it: households with no solar, because the Tesla Wall Connector costs about half as much. See charging an EV with solar.
Best cheap charger for overnight charging: Tesla Wall Connector Gen 3
The Tesla Wall Connector Gen 3 is the lowest-cost well-supported charger here, at about A$800. JET Charge lists it at A$727 excluding GST with a 4-year warranty and a 7.3 m tethered cable.
Pros:
- Cheapest hardware of the eight, with the joint-longest warranty (4 years).
- Uses the standard Type 2 plug, so it charges non-Tesla cars.
Cons:
- SolarQuotes calls it “dumb” for solar, because it cannot follow surplus without a Tesla Powerwall; see our Powerwall 3 review.
- It does not support OCPP 1.6 or bi-directional charging, according to SolarQuotes.
- Three phase output: Tesla’s Gen 3 specification sheet (hosted by SolarQuotes, undated) lists a maximum of 32 A, installer-adjustable, on single phase 230 V or three phase 400 V. That is about 7.4 kW single phase and up to about 22 kW on three phase (our arithmetic), but the car’s onboard charger sets the real rate, and retailers describe 11 kW as typical for Tesla cars sold here. We could not open Tesla’s Australian page, so confirm the rating with your installer.
Who should skip it: anyone who wants to charge from rooftop surplus without a Powerwall or a subscription app such as ChargeHQ.
Best value solar-ready charger: Evnex E2 Core
The Evnex E2 Core is the best-priced charger with solar features built in and a 4-year warranty. Evnex’s Australian page lists A$1,099 for the charger, and installed prices from A$2,000.
Pros:
- Solar smarts included.
Cons:
- Fixed at 7.4 kW; three phase needs the X22 at A$1,699.
- The Flex at A$799 is grid-only unless you pay Evnex a one-off A$349 for solar smarts.
Who should skip it: three phase homes that want 11 kW or 22 kW and do not want the X22.
Best for an extendable warranty: Ocular IQ Home Solar
The Ocular IQ Home Solar is an any-inverter solar charger whose warranty can be extended from the standard term to 5 years (A$180 a year at EVSE). EVSE lists the 7 kW tethered model from A$1,195.
Pros:
- Fast, Solar Assist and Solar Only modes; Solar Only needs about 1.6 kW of surplus on single phase.
Cons:
- Warranty is 3 years on the Ocular Australia and EVSE product pages, conditional on installation following the supplied instructions. An older SolarQuotes review says 2 years, so get the term in writing.
Who should skip it: buyers who rank after-sales support above price.
Best for Fronius inverter owners: Fronius Wattpilot
The Fronius Wattpilot is a sensible match only if you already run a Fronius inverter. SolarQuotes lists the Home 22 J at about A$1,800 (its December 2024 pricing) and Solar Choice at an A$1,750 RRP, both before cable and smart meter, so treat the price as a guide only. The warranty is 2 years, and surplus charging needs a compatible Fronius inverter and smart meter.
Pros:
- Surplus charging starts at about 1.38 kW and integrates with the Fronius SolarWeb app.
- Pairs naturally with the Fronius GEN24 Plus.
Cons:
- The Home 11 J is limited to 3.68 kW on single phase, so most homes need the 22 J.
- A 2-year warranty on an A$1,800 charger is the weakest value here, and one SolarQuotes reviewer calls the app “a bit buggy”.
Who should skip it: anyone without a Fronius inverter.
Best for Sigenergy battery owners: Sigenergy EV AC Charger
The Sigenergy EV AC Charger suits homes with a SigenStor battery. SolarQuotes lists about A$1,200 for 7 kW single phase, A$1,300 for 11 kW and A$1,500 for 22 kW, with 3 years’ warranty on the electronics and enclosure.
Pros:
- 100% PV, solar boost and fast modes through the mySigen app.
Cons:
- SolarQuotes says the solar modes require a SigenStor battery.
- Load management needs the Sigen Power Sensor, an optional extra.
Who should skip it: anyone without a Sigenergy system. See our SigenStor review.
Best for Sungrow hybrid inverter owners: Sungrow AC22E-01
The Sungrow AC22E-01 is a low-cost charger at about A$950, sold in Australia since June 2025, according to SolarQuotes. The charger carries 3 years’ warranty, while the cable and connector carry 2 years.
Pros:
- Low price, with a 5 m tethered cable included.
Cons:
- Smart solar charging needs a Sungrow hybrid inverter, an iHomeManager at the switchboard, an energy meter and iSolarCloud set-up.
- SolarQuotes calls Sungrow’s local Modbus control unreliable.
Who should skip it: owners of non-Sungrow inverters. See our Sungrow SH-RS hybrid inverter review.
Best for GoodWe battery owners: GoodWe HCA
The GoodWe HCA is a low-cost charger for GoodWe households, with a published 2-year warranty. SolarQuotes reports solar-only smart charging only with a GoodWe battery; without one, the charger still uses surplus solar first but cannot do solar-only charging.
Pros:
- Low hardware prices (about A$850 for 7 kW, A$950 for 11 kW, A$1,100 for 22 kW in the SolarQuotes review).
Cons:
- 2-year warranty, level with the shortest here.
- The 22 kW model is socket only, so you supply a Type 2 cable.
- The newer G2 adds dynamic load balancing but, as at SolarQuotes’ June 2025 notes, was not on GoodWe’s Australian site, and we could not confirm its solar modes. We could not open GoodWe’s own page, so the solar-mode limits are SolarQuotes’ report of GoodWe’s claim.
Who should skip it: anyone without a GoodWe battery. See our GoodWe inverter review and GoodWe Lynx battery review.
7 kW vs 22 kW EV charger: which do you need?
A 7 kW charger is enough for nearly every single phase Australian home, because that is the most a single phase supply carries (about 7.4 kW at 32 A). A 22 kW charger only helps on three phase and only if your car accepts that rate, and many cars here cap AC charging at 7 kW or 11 kW.
At 7 kW you add roughly 40 km of range per hour, enough for a typical day overnight. If your home is single phase, buy the 7 kW model.
Worked example: what solar surplus charging is worth
Assumptions are ours: 200 km a week at 18 kWh per 100 km (36 kWh a week), an export rate of 5c per kWh and a grid rate of 32c per kWh. Charging 36 kWh from surplus solar forgoes A$1.80 of export income, against A$11.52 from the grid, a saving of about A$9.72 a week or roughly A$500 a year. That does not by itself justify paying about A$750 more than for a basic charger, and if you charge overnight on an off-peak plan a plain charger such as the Tesla Wall Connector is likely the better buy. Feed-in rates are explained in our feed-in tariff guide.
How we chose
We started from the chargers SolarQuotes compares, then kept those with a published Australian price and a stated warranty. We left out the Wallbox Pulsar chargers because the SolarQuotes review reports no Australian office and warranty lengths that sources report differently. Where sources disagreed, we name the source. None of these chargers is a vehicle-to-grid product, and SolarQuotes lists the Tesla Wall Connector as not bi-directional and the Wattpilot as lacking V2G or V2H support; see our V2G guide.
What to check on your quote
- Hardware, installation and CT clamp fitting as separate lines.
- Your inverter brand. Ask in writing whether solar surplus mode works with it. See our best hybrid inverters guide.
- Warranty length and who pays labour.
- Phase and rating. Confirm the maximum kW your supply and car can use.
Find licensed local installers through our solar installer directory and check each installer’s accreditation on the official registers yourself.
FAQ
What is the best home EV charger in Australia?
The best home EV charger in Australia for most solar homes in November 2026 is the myenergi Zappi, because it works with any inverter. The Tesla Wall Connector is better if you charge overnight and want the lowest price. Brand-locked chargers suit owners of that brand’s inverter or battery.
Is the Tesla Wall Connector good for non-Tesla cars?
Yes, the Tesla Wall Connector Gen 3 uses the standard Type 2 plug, so it charges non-Tesla cars. It costs about A$800 with a 4-year warranty. It cannot follow solar surplus on its own, so it suits overnight or scheduled charging.
Does the Zappi work with any solar inverter?
Yes, the myenergi Zappi measures surplus with its own CT clamp, so it does not depend on your inverter brand. The installer fits the clamp at your switchboard. SolarQuotes notes its 40 degree maximum operating temperature, so avoid hot, sun-baked mounting spots.
Is a 22 kW home EV charger worth it in Australia?
Usually not. A 22 kW charger needs three phase supply and a car that accepts 22 kW on AC, and many cars cap at 7 kW or 11 kW. Most single phase homes are limited to about 7.4 kW.
How much does a smart EV charger cost in Australia?
Hardware for the eight chargers here runs from about A$800 to A$1,800 as at November 2026, before installation, which is extra. See our installation cost guide for ranges.
Do I need a battery to charge my EV from solar?
No. A solar-aware charger such as the Zappi, Evnex E2 Core or Ocular IQ Home Solar uses surplus from your panels with no battery. Sigenergy and GoodWe solar modes do depend on their own batteries, according to SolarQuotes.
Which EV charger has the longest warranty?
The Tesla Wall Connector and Evnex E2 have the longest warranties here at 4 years. Fronius Wattpilot and GoodWe HCA have 2 years, and Sungrow, Sigenergy and myenergi list 3 years.
Can I get a rebate for a home EV charger?
We found no open federal, state or territory rebate for a home EV charger as at November 2026, with the ACT Sustainable Household Scheme loan the main exception, as covered in our installation cost guide.
Sources
- myenergi Australia, zappi page
- Evnex Australia, E2 Core and charger comparison
- JET Charge wholesale, Tesla Gen 3 Wall Connector
- EVSE, Ocular IQ Home Solar 7 kW
- SolarQuotes, home EV chargers in Australia
- SolarQuotes, Zappi review
- SolarQuotes, Tesla Wall Connector review
- SolarQuotes, Fronius Wattpilot review
- SolarQuotes, Sigenergy review
- SolarQuotes, Sungrow review
- SolarQuotes, GoodWe review
- SolarQuotes, Ocular review
- SolarQuotes, Wallbox review
About this guide
This guide was written by the Solar Cobber editorial team from independent desk research checked in November 2026. Solar Cobber is a free directory that may earn referral or advertising fees from installers, and commercial relationships never affect our content. This is general information, not financial advice. To report an error, use our contact page.
Filed under Solar Products
Back to blog


